LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
SYSTEM ALARM and WARNING
INT 3113:FILE NOT FOUND
(1)File not found in the system.
(2)Making/modifying the executing file.
(3)Press RESET to clear wrong warning message.
INT 3114:END OF FILE
INT 3120:POST ERROR
INT 3121:LACK OF SUB RETURN(M99)
(1)No returning to the part program command in the sub-program.
(2)Add returning back to the part program command in the sub-program.
(3)Press RESET to clear wrong warning message.
INT 3122:PROGRAM OVERFLOW(8)
(1)Total numbers of calling Sub-program or MACRO is over the total level limit.(i.e.,
8)
(2)Decrease numbers of calling program level.
(3)Press RESET to clear the wrong warning message.
INT 3123:MACRO OVERFLOW(4)
(1)Total numbers of calling MACRO is over the total level limit. (i.e., 4).
(2)Decrease numbers of calling program level.
(3)Press RESET to clear the wrong warning message.
INT 3124:MACRO UNDERFLOW(G67)
INT 3125:WITHOUT LABEL
(1)NO such LABEL .
(2)Please check LABEL name.
(3)Press RESET to clear wrong message error.
264 LNC Technology Co., Ltd.