LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
1112 ENCODER.X PULSES/ROTATION
1113 ENCODER.Y PULSES/ROTATION
1114 ENCODER.Z PULSES/ROTATION
1115 ENCODER.4TH PULSES/ROTATION
Range: 1 ~ 99999999
Active: Active After Reboot
Level: Machinery Builder
Default 2500
value:
Unit: pulse
Description
:
Assumed PULSE per rotation of this axis Motor Encoder is 2500, please set this
parameter value to 2500. Please also refer to each axis feedback ratio multiplier
setting description
65 ABSOLUTE ENCODER (BIT)
Range: 0 ~ 63
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description BIT 0:Setting 0 to indicate X axis uses Incremental Encoder and 1 to indicate X
:
axis uses Absolute Encoder.
BIT 1:Setting 0 to indicate Y axis uses Incremental Encoder and 1 to indicate Y
axis uses Absolute Encoder.
BIT 2:Setting 0 to indicate Z axis uses Incremental Encoder and 1 to indicate Z
axis uses Absolute Encoder.
BIT 3:Setting 0 to indicate the 4th axis uses Incremental Encoder and 1 to
indicate the 4th axis uses Absolute Encoder.
LNC Technology Co., Ltd. 157