LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
1030 X.OFF FOR ORG.4 REF TO ORG.1
1031 Y.OFF FOR ORG.4 REF TO ORG.1
1032 Z.OFF FOR ORG.4 REF TO ORG.1
1033 4.OFF FOR ORG.4 REF TO ORG.1
Range: -99999999 ~ 99999999
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description:this parameter is to set the offset amount of the 1 st reference point
corresponding to the 4 th reference point of X axis. Assumed the desired
corresponding offset amount of the 1 st reference point is 2000um, so set
the offset amount to 2000.
1098 ABS. ENCODER CHECK RANGE
Range: 0 ~ 1000
Active: Active After RESET
Level: Machinery Builder
Default 30
value:
Unit: pulse
Description:To set the max difference value that is between NC internal Encoder value and
Driver Absolute Encoder value. Difference value that is between setting value of
X axis Absolute Encoder (System Data #41) and NC internal value (System
Data #32). Difference value that is between setting value of Y axis Absolute
Encoder (System Data #42) and NC internal value (System Data #33).
Difference value that is between setting value of Z axis Absolute Encoder
(System Data #43) and NC internal value (System Data #34). Difference value
that is between setting value of the 4th axis Absolute Encoder (System Data
#44) and NC internal value (System Data #35).
1104 1ST SPEED OF X HOMING
1105 1ST SPEED OF Y HOMING
1106 1ST SPEED OF Z HOMING
1107 1ST SPEED OF C HOMING
Range: 1 ~ 99999999
Active: Active After RESET
Level: Machinery Builder
Default 2000000
value:
Unit: um/min
Description:during each axis zero return procedure, moves toward this axis
reference point in this parameter setting speed (set by parameter 0120).
After reaching the home DOG, please use the 2 nd gear speed, which is set
by parameter 1108 ~ 1111, to move and to search for motor reference point.
LNC Technology Co., Ltd. 223