LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
SPECIFICATION
1.2 LNC 600 Standard Controller & LNC 600 Compact Controller
LNC 600 series controller has the following two categories: LNC standard and LNC
compact. Detailed descriptioin of each category is as below:
1.2.1 LNC600 Standard Controller
LNC600 Standard Controller is based on the standard industrial PC which is suitable in
normal tool machines, industrial machines and automation systems. LNC 600 standard
controller has excellent maintenance, high performance motion control functions and a lot
I/O points support which all can be used in all kinds of industries. Moreover, PC open
system and modularized design will make system function easier to upgrade and to
maintain.
1.2.2 LNC600 Compact Controller
LNC600 compact controller is designed for normal automation system or smaller machines.
It can save space more effectivly.
1.2.3 Specifications Table of LNC 600
Specification
The exquisite type
constructing and
putting
PC Industrial PC Industrial PC
Show interfaces VGA interface VGA interface
The standard type
constructing and putting
Transmit interfaces Ethernet , RS- 232/485 Ethernet , RS232
Store interfaces IDE , FDD , CF IDE , FDD
Offer the power to export No 5V , 12V
Deposit and withdraw the
storing device dynamically Above 32M
Above 32M
( SDRAM )
Store on the device Above card 32M of CF Above card 32M of CF
Qualify for the next round of
competitions in the way
Servo system
Qualify for the next round
of competitions in the
front
Offer the position return
circuit
The front and qualifying for
the next round of
competitions partly
Offer a return circuit / the
speed return circuit of
position to control
2 LNC Technology Co., Ltd.