LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
Manual
Progra
Actual
Program
Interrupt Point
Disable MANUAL RETURN
Other than using this parameter to set MANUAL RETURN function, C BIT 0004
can also be used:
If C BIT 004 is ON, it means enable MANUAL RETURN function.
If C BIT 004 is OFF, it means disable MANUAL RETURN function.
Moreover, if the Parameter #0180 is 1, MANUAL RETURN function will be
enabled no matter C BIT 004 is enable or not. On the other hand, if Parameter
#0180 is 0, C BIT 004 does matter whether or not to enable this function.
187 FEED RATE CLAMPING
Range: 0 ~ 1
Active: Active After RESET
Level: User
Default 0
value:
Unit: Nul
Description
:
0:No
1:Yes
There will be a error amount ΔR between arch commanding and actual path.
△R
R
242 LNC Technology Co., Ltd.