LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
SYSTEM ALARM and WARNING
INT 3006:DIVIDED BY 0
(1)MACRO is divided by 0.
(2)Modify numerator of the division. Must NOT be 0.
(3)Press RESET to clear the wrong warning message.
INT 3007:VARIABLE OVER RANGE
(1)One/some of local variables, common variables and global variables are out of
range.
(2)Modify variable numbers that are out of their number range.
(3)Press RESET to clear the wrong warning message.
INT 3008:MACRO DOMAIN ERROR
(1)MACRO function domain error. If square (SQRT) argument is negative or ATAN
arguments are two zeros.
(2)Modify domain.
(3)Press RESET to clear the wrong warning message.
INT 3010:NOT ALLOWABLE DECIMAL POINT
(1)NC address has not allowable decimal point.
(2)Modify decimal point in NC address.
INT 3011:WORD DATA OVER RANGE
(1)NC address word data is out of range.
(2)Modify word data in NC address.
(3)Press RESET to clear wrong warning message.
INT 3012:MACRO ILLEGAL MACRO PARAMATER INPUT(G、L、N、O、P)
(1)Illegal arguments(G,L,N,O,P)in MACRO program.
(2)Correcting these illegal arguments.
(3)Press RESET to clear wrong warning message.
INT 3050:TOOL DIAMETER IS 0
INT 3051:ILLEGAL RPM GIVEN
INT 3052:ILLEGAL FEEDRATE GIVEN
LNC Technology Co., Ltd. 261