LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
66 4TH AXIS LINEAR/ROTARY TYPE
Range: 0 ~ 1
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description 0: rotary axis
:
1: linear axis
If the 4 th -axis is linear axis, please set the lead screw pitch (Parameter #0107);
if the 4 th -axis is rotary axis, please set the lead screw pitch as 360 (i.e. 360 ∘ ).
85 MAX FOLLOWING ERROR X100 (BIT)
Range: 0 ~ 63
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description BIT0:when set as 1, the maximum following error of X-axis (parameter # 0002)
:
is magnified 100 times.
BIT1: when set as 1, the maximum following error of Y-axis (parameter # 0003)
is magnified 100 times.
BIT2:when set as 1, the maximum following error of Z-axis (parameter # 0004)
is magnified 100 times.
BIT3:when set as 1, the maximum following error of 4 TH -axis (parameter #
0005) is magnified 100 times.
158 LNC Technology Co., Ltd.