LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Appendix F Internet Setting Description
f. If the network protocol “NetBEUI” is not installed, please highlight it on the menu as shown in
the diagram below then click OK to complete installation.
B. Verify if Computer Name & Workgroup are set correctly.
(The setting of workgroup and logondomain in C:\net\system.ini must be the
same as those at PC side. The computername in C:\net\2net.bat must be the
same as PC’s computer name.)
a. Select Start Settings Control Panel.
b. Double-click on the Network icon.
c. Verify if the settings of Computer Name & Workgroup are the same as those in
C:\NET\2net.bat & C:\NET\system.ini. (Take the diagram below as an example,
computername of 2net.bat should be set to “tenwho”;workgroup of system.ini should be
set to “Workgroup”).
LNC Technology Co., Ltd. 351