LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Hardware Maintenance
3 Hardware Maintenance
3.1 Power supply
This system uses these power supply:
Supply
Brand type Input voltage Output voltage
target
LCD module Skynet
SNP-PA57 AC 110/230V DC 12V/4.2A
Electronic Co.,Ltd
60/50HZ
System Skynet
Electronic Co.,Ltd
SNP-Z101 AC 110/230V
60/50HZ
DC 5V/11.5A
DC 12V/3A
output MEAN WELL
Enterprises Co.,Ltd
ADS-15524 AC 110/230V
60/50HZ
DC -12V/0.5A
DC 24V/5.8A
DC 5V/3A
3.2 LNC600 Standare Controller
3.2.1 Standard
1. Case with 8 slots (including 5V/12V power supply)
2. Slave I/O (40 Input / 32 Output)
3. SCSI 68 Pin Cable
3.2.2 Cabinet Equipment
1. Standard Operation Panel
2. Standard Transit Board
3. Relay Board (40 Input / 32 Output)
3.2.3 Optional
1. Extension Slave I/O Board (24 Input / 32 Output)
2. Slave I/O (40 Input / 32 Output)
3. CD – ROM
4. Floppy Disk
3.2.4 PCC1620 Motion Control Card Hardware Specification
1. 4 axes Pulse / Vcmd control
2. Spindle control panel Pulse / Vcmd (Encoder Feedback)
3. Analogy output provides 6 Channel (16 Bits)
4. I/O highest supports to 256 Input / 256 Output (use remote I/O transmit)
5. Provide 4 axes Home Sensor
6. Provide 1 axis MPG +/- 31 Bits Counter
12 LNC Technology Co., Ltd.