12.07.2015 Views

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Title:<strong>Montpelier</strong> District Heating<strong>City</strong> <strong>of</strong> <strong>Montpelier</strong>, VT01580 – Project Identification SignIssue Date:September 28, 2012Page #:3 <strong>of</strong> 3A. Install sign within one week after Work begins at the site, in a location directed bythe OWNER’S Representative.B. Set posts plumb, 4 feet into the ground. Compact backfill around posts.C. Fasten sign framing, in a level position, securely to posts with 16d common nails(minimum 3 per post).3.2 CONTENTA. Submit proposed sign layout before fabrication.B. List the following entities, in equal sized letters1. OWNER2. Federal Department <strong>of</strong> Energy and their Project Number3. Lead Engineer, <strong>City</strong> and State4. Civil Engineer, <strong>City</strong> and State5. Underground Piping Engineer, <strong>City</strong> and State6. Permit Engineer, <strong>City</strong> and State7. Prime Contractor, <strong>City</strong> and State8. Sub Contractors, <strong>City</strong> and State3.3 MAINTENANCE AND REMOVALA. Maintain the sign plumb and level for the duration <strong>of</strong> the Work.B. When directed, at completion <strong>of</strong> project, remove sign from OWNER’S property.END OF SECTION 01580PROJECT IDENTIFICATION SIGN 01580 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!