Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT15990 – Testing, Adjusting, and BalancingIssue Date:September 28, 2012Page #:5 of 11project identification and a title descriptive of the contents. Divide thecontents of the binder into the below listed divisions, separated by dividertabs:a. General Information and Summaryb. Air Systemsc. Hydronic Systemsd. Temperature Control Systemse. Special Systems3. Report Contents: Provide the following minimum information, forms anddata:a. General Information and Summary: Inside cover sheet to identifytesting, adjusting, and balancing agency, Contractor, Owner,Architect, Engineer, and Project; including addresses, contactnames, and telephone numbers. Provide a listing of theinstruments used for the procedures along with the proof ofcalibration.b. The remainder of the report shall contain the appropriate formscontaining as a minimum, the information indicated on thestandard report forms prepared by the AABC or NEBB, for eachrespective item and system. Prepare a schematic diagram for eachitem of equipment and system to accompany each respective reportform.4. Refer to Part 3 for additional documentation requirements.1.6 PROJECT CONDITIONSA. Systems Operation: Systems shall be fully operational prior to beginningprocedures.1.7 SEQUENCING AND SCHEDULINGA. Test, adjust, and balance the air systems before hydronic, steam, and refrigerantsystems.B. Test, adjust and balance air conditioning systems during summer season andheating systems during winter season, including at least a period of operation atTESTING, ADJUSTING, AND BALANCING159905