Specifications - City of Montpelier, Vermont

Measurement shall be on an each basis for fire hydrants installed and after acceptance by the ENGINEER.Measurement shall be the actual number of fire hydrants.fire hydrant extensions installed and after acceptance by the ENGINEER, shall be included in the price of thefire hydrant.B. PaymentPayment shall be made at the contract unit price for each fire hydrant furnished and installed, which priceshall be full compensation for all labor, materials, tools, and equipment necessary for furnishing, installing,setting, and painting fire hydrant, including clearing and grubbing; cutting and removal of pavement(including cement concrete pavement); excavation (excluding rock and boulder excavation); excavationsupport; temporary rerouting and controls; dewatering (including the use of crushed stone); bedding;jointing; backfilling; compaction; testing; disinfection; restoration of growth and surface (excluding paving,curbing and sidewalk restoration within trench limits); restoration of physical features (including steps andfences); removal, hauling and proper disposal of excess and unsuitable material offFsite; one (1) set of spareparts; one (1) hydrant wrench and all other work necessary or incidental to the satisfactory completion of thisitem.The unit price shall be full compensation for furnishing and installing standpipe extension, drip rod extension,stem extension, couplings, pins, bolts, nuts, gaskets, jointing, painting, backfilling; compaction; testing;restoration of growth and surface (excluding paving, curbing and sidewalk restoration within trench limits);disinfection and all other work necessary or incidental to the satisfactory completion of this item.Payment for 6 inch anchor tee, 6 inch water main and gate valves and hydrant branches shall be made undertheir respective items.Item [8] < Remove Existing HydrantA. MeasurementMeasurement shall be the actual number of existing hydrants removed as shown on the drawings or asdirected and accepted by the ENGINEER.B. PaymentPayment shall be made at the contract unit price for each hydrant removed, which price shall be fullcompensation for all labor, materials, tools, and equipment necessary to satisfactorily remove the existinghydrant, including clearing and grubbing; cutting and removal of pavement (including cement concretepavement); excavation (excluding rock and boulder excavation); excavation support; temporary reroutingand controls; dewatering (including the use of crushed stone); cutting and capping the existing water mainbeyond the fire hydrant base; including maintaining the serviceability of the existing hydrant and watermain; backfill, restoration of growth, and transfer of temporary bench marks to new hydrants. All hydrantsto include base and fittings removed shall remain the property of the Owner and be stored at a locationprovided by the Owner. The Contractor is responsible for transporting the hydrants to the designatedlocation. Unserviceable hydrants shall be disposed of by the contractor as part of this Bid Item.Item 64 [9] < 3000 PSI Non