Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT16480 – MOTOR CONTROLLERSIssue Date:September 28, 2012Page #:10 of 12j. All door mounted switches to have factory punched and keyedlegend plate which identifies device number and indicates allswitch positions.k. All door mounted pilots to have factory punched and keyed legendplate which identifies device number.l. All door mounted switches and pilots to have a 1.75" x .75"laminated plastic nameplate to identify device function. Nameplateto be black with .125" high white lettering.m. All components within the enclosure shall have a 1.0" x .5"laminated plastic nameplate to identify device number. Nameplateto be black with .125" high white lettering.n. Voltage barrier kit consisting of plexiglass covers for line side ofdisconnecting means, door mounted devices above 50V, and anyforeign voltage sources.o. Enclosure and components assembly shall be constructed inaccordance with UL Std. 508 and labeled as such.15. Service and Parts Warrantya. Startup service performed by a factory approved and certifiedtechnician.b. To be included with start up service, for a period of TWO YEARSafter initial start up, is a full parts and labor ON SITE warranty atNO ADDITIONAL COSTS.PART 3EXECUTION3.1 EXAMINATIONA. Examine areas and conditions under which motor controllers are to be installed,and notify Contractor in writing of conditions detrimental to proper completion ofthe work. Do not proceed with the work until unsatisfactory conditions have beencorrected in a manner acceptable to Installer.3.2 INSTALLATION OF MOTOR CONTROLLERSA. Install motor controllers where indicated, in accordance with equipmentmanufacturer's written instructions and with recognized industry practices;complying with applicable requirements of NEC, UL and NEMA standards, toinsure that products fulfill requirements.B. Tighten connectors and terminals, including screws and bolts, in accordance withequipment manufacturer's published torque tightening values for equipmentMOTOR CONTROLLERS 16480 10