12.07.2015 Views

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Title:<strong>Montpelier</strong> District Heating<strong>City</strong> <strong>of</strong> <strong>Montpelier</strong>, VT019110 – General Commissioning RequirementsIssue Date:October 17, 2012Page #:28 <strong>of</strong> 303. Training shall normally start with classroom sessions followed by handson demonstration/training on each piece <strong>of</strong> equipment.4. During any demonstration, should the system fail to perform in accordance with the requirements <strong>of</strong> the O&M manual or sequence <strong>of</strong> operations,the system shall be repaired or adjusted as necessary and the demonstration repeated at another scheduled time, if necessary.5. The appropriate trade or manufacturer's representative shall provide theinstructions on each major piece <strong>of</strong> equipment. Practical building operating expertise as well as indepth knowledge <strong>of</strong> all modes <strong>of</strong> operation <strong>of</strong>the specific piece <strong>of</strong> equipment is required. More than one party may berequired to execute the training.6. The controls contractor shall attend sessions other than the controls training, as specified, to discuss the interaction <strong>of</strong> the controls system as it relates to the equipment being discussed.7. The training sessions shall follow the outline in the table <strong>of</strong> contents <strong>of</strong> theoperation and maintenance manual and illustrate whenever possible theuse <strong>of</strong> the O&M manuals for reference.8. Training shall include:a. Use <strong>of</strong> the printed installation, operation and maintenance instruction material included in the O&M manuals.b. A review <strong>of</strong> the written O&M instructions emphasizing safe andproper operating requirements, preventative maintenance, specialtools needed and spare parts inventory suggestions. The trainingshall include startup, operation in all modes possible, shutdown,seasonal changeover and any emergency procedures.c. Discussion <strong>of</strong> relevant health and safety issues and concerns.d. Discussion <strong>of</strong> warranties and guarantees.e. Common troubleshooting problems and solutions.f. Explanatory information included in the O&M manuals.g. Discussion <strong>of</strong> any peculiarities <strong>of</strong> equipment installation or operation.GENERAL COMMISSIONING REQUIREMENTS 01910 28

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!