Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT16010 – Basic Electrical RequirementsIssue Date:September 28, 2012Page #:3 of 91.5 SUBMITTALSA. General: Follow the procedures specified in Division 1 Section "SUBMITTALSAND SUBSTITUTIONS." Refer to Division 1 "Submittals and Substitutions" forproper procedure when providing an alternate product.B. Additional copies may be required by individual sections of these SpecificationsC. Provide standard catalog cuts and shop Drawings of all materials and equipment.Shop Drawings shall indicate all sizes, rating, mechanical, electrical andfunctional features. Poor quality reproduced Shop Drawings will be rejected.D. Provide installation instructions and operation and maintenance manuals for allequipment.E. Provide list of nameplate designations for acceptance prior to engraving.F. Provide duplicate copies of electrical inspection certificates.G. All submittals shall bear a stamp which indicates the Contractor has reviewed thesubmittals for compliance with the specifications. Stamp shall include contractorname, project title and date.H. Provide complete listing of all tests performed and copies of the certified testresults.1.6 RECORD DOCUMENTSA. Prepare record documents in accordance with the requirements in Division 1. Inaddition to the requirements specified in Division 1, indicate installed conditionsfor:1. Major raceway systems, size and location, for both exterior and interior;locations of control devices; distribution and branch electrical circuitry;and fuse and circuit breaker size and arrangements.2. Equipment locations (exposed and concealed), dimensioned fromprominent building lines.3. Approved substitutions, Contract Modifications, and actual equipment andmaterials installed.BASIC ELECTRICAL REQUIREMENTS160103