Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT15830 – Heating Terminal UnitsIssue Date:September 28, 2012Page #:7 of 8B. Locate convectors as indicated, coordinate with other trades to assure correctrecess size for recessed convectors.3.4 INSTALLATION OF UNIT HEATERSA. General: Install unit heaters as indicated, and in accordance with manufacturer'sinstallation instructions.B. Uncrate units and inspect for damage. Verify that nameplate data correspondswith unit designation.C. Hang units from building substrate, not from piping. Mount as high as possible tomaintain greatest headroom possible unless otherwise indicated.D. Support units with rodtype hangers anchored to building substrate with vibrationisolators.E. Install piping as indicated.F. Protect units with protective covers during balance of construction.3.5 INSTALLATION OF CABINET HEATERSA. General: Install cabinet heaters as indicated, and in accordance withmanufacturer's installation instructions.B. Locate cabinet heaters as indicated, coordinate with other trades to assure correctrecess size for recessed units.C. Install piping as indicated.D. Protect units with protective covers during balance of construction.3.6 INSTALLATION OF COILSA. General: Install coils as indicated, and in accordance with manufacturer'sinstallation instructions.B. Mount coils on independent supports hung from structure, refer to details on theDrawings.C. Pitch coil casings for drainage, not less than 1/2" toward return connections,HEATING TERMINAL UNITS158307