Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT16010 – Basic Electrical RequirementsIssue Date:September 28, 2012Page #:8 of 9number of conduits for the circuit required, nor is the location of indicated runsintended to show the actual routing of conduits.B. If any departures from the Construction Documents are deemed necessary byContractor in order to furnish an efficient, complete and satisfactory installation,details of such departures and the reasons therefore shall be brought to theattention of Engineer. Do not make departures without prior approval of Engineer.Departures from the Construction Documents without the approval of theEngineer will be at the Contractors risk. Any corrections to the installation as aresult of these departures will be by the Contractor with no cost to the Owner orDesign Professionals.3.6 FIELD QUALITY CONTROLA. Provide all labor, materials, testing equipment, electricity, fuel, lights, lubricants,equipment instruments and all other materials required for conducting all tests.B. Check for proper phase sequence and test all parts of the electrical system beforeplacing them in service.C. All systems shall test free from short circuits and grounds, shall be free frommechanical and electrical defects, and shall show insulation resistance betweenphase conductors and ground of not less than that required by NEC, or asspecified herein.D. All equipment shall have proper neutral connections where required.E. Insulation test equipment, motors, cables, etc., shall pass the Standard InsulationTest established by the IEEE and shall be made before and after all required highpotential tests. All insulation testers shall be of the motor driven, direct readingtype, unless otherwise noted.F. Check all motors for proper rotation and all starters for proper overload protectiveelements.G. Test all electrical devices for proper control of motors and equipment.H. Lamp all fixtures with lamps as specified and check operation. Conduct all othertests required to secure approval of the work from all agencies having jurisdiction.3.7 ADJUST AND CLEANBASIC ELECTRICAL REQUIREMENTS160108