12.07.2015 Views

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Title:<strong>Montpelier</strong> District Heating<strong>City</strong> <strong>of</strong> <strong>Montpelier</strong>, VT15010 – Basic Mechanical RequirementsIssue Date:September 28, 2012Page #:2 <strong>of</strong> 13D. Division 15 covers, in broad detail, the extent <strong>of</strong> the mechanical work and theequipment to be provided and shall not be construed as a complete description <strong>of</strong>all the details <strong>of</strong> design and construction required.E. Provide all labor, materials, equipment, articles, and tools and perform all worknecessary for the complete execution <strong>of</strong> the mechanical work, as shown on theDrawings, required by the <strong>Specifications</strong> and work not specifically shown orspecified, yet required to insure the design intent inherent in the work and tocomply with all applicable codes and regulations.F. The Drawings are generally diagrammatic, intended to convey the scope <strong>of</strong> thework and indicate the general arrangement <strong>of</strong> equipment, ductwork and pipingand approximate sizes and locations <strong>of</strong> equipment. Do not scale Drawings.1.3 SUBMITTALSA. General: Follow the procedures specified in Division 1 Section "SUBMITTALPROCEDURES."B. Additional copies may be required by individual sections <strong>of</strong> these <strong>Specifications</strong>.C. Provide catalog cuts and shop drawings for all equipment, trim, devices andmaterials. Submittals shall be project specific indicating all specialties andaccessories intended to be provided. Clearly indicate the precise items submitted.D. Provide installation instructions and operation and maintenance manuals for allequipment.E. Provide all asbuilt mechanical drawings.F. Provide copies <strong>of</strong> all required permits.G. Provide complete copies <strong>of</strong> all air and water balancing reports.1.4 QUALITY ASSURANCEA. Equipment and appurtenances shall be designed in conformity with ANSI,ASME, IEEE, NEMA, OSHA, AGMA and other generally accepted applicablestandards. They shall be <strong>of</strong> rugged construction and <strong>of</strong> sufficient strength towithstand all stresses which may occur during fabrication, testing, transportation,installation and all other conditions or operations. All bearings and moving partsBASIC MECHANICAL REQUIREMENTS150102

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!