Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT15995 – Commissioning of Mechanical SystemsIssue Date:September 28, 2012Page #:2 of 7responsible for commissioning the equipment they install. However, this Contractor shall participate with the State’s engaged contractors for a complete distribution system commissioning effort.1.4 SUBMITTALSA. Refer to Division 01 Section “Submittals” for specific requirements.B. In addition, provide the following:1. Certificates of readiness2. Certificates of completion of installation, prestart, and startup activities.3. O&M manuals4. Contractor and equipment startup and test reports5. Completed construction checklistsPART 2PRODUCTS2.1 TEST EQUIPMENTA. All standard testing equipment required to perform startup, initial checkout andfunctional performance testing shall be provided by the contractor for the equipment being tested. For example, the mechanical contractor of Division 22 shallultimately be responsible for all standard testing equipment for the mechanicalsystem in Division 22, except for equipment specific to and used by TAB in theircommissioning responsibilities. A sufficient quantity of twoway radios shall beprovided by each subcontractor.B. Refer to Division 01 Section 019110 “General Commissioning Requirements” fora detailed description of test equipment requirements.PART 3EXECUTION3.1 GENERAL DOCUMENTATION REQUIREMENTSA. With assistance from the installing contractors, the CxA will prepare PreFunctional Checklists for all commissioned components, equipment, and systems.B. Redlined Drawings:1. The contractor will verify all equipment, systems, instrumentation, wiringand components are shown correctly on redlined drawings.MECHANICAL SYSTEM COMMISSIONING REQUIREMENTS 15995 2