12.07.2015 Views

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Title:<strong>Montpelier</strong> District Heating<strong>City</strong> <strong>of</strong> <strong>Montpelier</strong>, VT15010 – Basic Mechanical RequirementsIssue Date:September 28, 2012Page #:6 <strong>of</strong> 13nomenclature and commercial numbers <strong>of</strong> replacement parts.2. Manufacturer's printed operating procedures to include startup, breakin,and routine and normal operating instructions; regulation, control,stopping, shutdown, and emergency instructions; and summer and winteroperating instructions.3. Maintenance procedures for routine preventative maintenance andtroubleshooting; disassembly, repair, and reassembly; aligning andadjusting instructions.4. Servicing instructions and lubrication charts and schedules.5. One complete set <strong>of</strong> nonreproducible (black or blue print) recorddocuments.6. A copy <strong>of</strong> all <strong>of</strong> the satisfactorily reviewed submittals.7. Valve tag charts.1.8 DELIVERY, STORAGE, AND HANDLINGA. Deliver products to the project properly identified with names, model numbers,types, grades, compliance labels, and other information needed for identification.1.9 MANUFACTURERS AND EQUALSA. The manufacturer’s products scheduled on the Drawings have been carefullyreviewed and specified to satisfy the intent <strong>of</strong> the design. If there is a discrepancybetween the scheduled product and the specification, the requirements listed in thespecification have priority and must be complied with.B. Division 15 specification sections may list comparable manufacturers as indicatedfor product requirements, subject to compliance with the requirements <strong>of</strong> thedrawings and specifications. Products by these listed alternate manufactures arenot considered to be substitutions but must be <strong>of</strong> similar physical size, capacity,construction, quality, features, and performance characteristics as that <strong>of</strong> thescheduled manufacturers. It is the Contractor's responsibility to coordinate anyconnection or other changes if the Contractor elects to install one <strong>of</strong> the alternatemanufacturers.C. Products by a manufacturer other than scheduled or specified as an alternative,BASIC MECHANICAL REQUIREMENTS150106

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!