Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT15010 – Basic Mechanical RequirementsIssue Date:September 28, 2012Page #:8 of 13conditions and the installed work of all other trades and verify that all conditionsand all such work is complete to the point where the mechanical work mayproperly commence.B. Verify that mechanical work may be done in complete accordance with allpertinent laws, codes, regulations and the design.C. In the event of discrepancy, immediately notify OWNER’S Representative.D. Do not proceed with the work in areas of discrepancy until all such discrepancieshave been fully resolved.3.2 MECHANICAL INSTALLATIONSA. Layout all work at the site by consultation with other trades before installing workto eliminate any conflict between this work and work of other trades.B. Coordinate mechanical work, in advance, with other work. The installation ofchases, openings, etc., required for mechanical equipment, shall be done at suchtime as to minimize the need for any subsequent cutting and patching. Prior to theordering of any equipment, verify the location, type and characteristics ofconnections to be furnished.1. Verify all dimensions by field measurements.2. Arrange for chases, slots, and openings in other building componentsduring progress of construction, to allow for mechanical installations.3. Coordinate the installation of required supporting devices and sleeves tobe set in pouredinplace concrete and other structural components, as theyare constructed.4. Sequence, coordinate, and integrate installations of mechanical materialsand equipment for efficient flow of the Work. Give particular attention tolarge equipment requiring positioning prior to closing in the building.5. Where mounting heights are not detailed or dimensioned, install systems,materials, and equipment to provide the maximum headroom possible.6. Coordinate connection of mechanical systems with exterior undergroundand overhead utilities and services. Comply with requirements ofgoverning regulations, franchised service companies, and controllingBASIC MECHANICAL REQUIREMENTS150108