Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT01660 – Product Storage & Handling RequirementsIssue Date:September 28, 2012Page #:2 of 3B. Handle, install, connect, clean, condition, and adjust products in accordance withsuch instructions and in conformity with Specifications. If Project conditions orSpecifications conflict with manufacturer’s instructions, consult with theOWNER’s Representative for direction. Do not proceed with Work without clearinstructions.C. Perform Work in accordance with manufacturer’s instructions. Do not omit anypreparatory step or installation procedure unless expressly modified or exemptedby Contract Documents or the Owner’s Representative.D. Should a conflict exist between specifications and instructions, consult withOwner’s Representative for direction.1.4 TRANSPORTATION AND HANDLINGA. The CONTRACTOR shall be responsible for transport of the necessary materialsto the project site.B. Deliver products in undamaged condition, in manufacturer’s original containers orpackaging, and with identifying labels intact and legible.C. Immediately upon delivery, inspect shipments to ensure compliance withrequirements of Contract Documents and approved submittals, and to ensure thatproducts are properly protected and undamaged.D. The CONTRACTOR shall be responsible for providing all equipment andsufficient personnel to handle products at time of pickup, delivery, and onsitestorage.E. The CONTRACTOR shall handle, haul, and distribute all materials and allsurplus materials on the different portions of the Work, as necessary or requiredand shall be responsible for the protection, loss of, or damage to materials andequipment furnished by the CONTRACTOR or others until Final Completion andacceptance of the Work. CONTRACTOR and all subcontractors are responsiblefor all damaged items caused by their respective employees and agents (includingsubcontractors) and shall replace all such damaged items without additional costto OWNER.F. The CONTRACTOR shall deliver all surplus materials to the location designatedby the OWNER at no additional cost at the completion of the Work.G. The CONTRACTOR shall arrange with material suppliers and manufacturers fordelivery and entry of equipment to the site at a suitable time. Inform appropriateparties of the size of access available for equipment so assembly of large units ofequipment on site may be considered when they are being manufactured.PRODUCT STORAGE AND HANDLING REQUIREMENTS016602