Specifications - City of Montpelier, Vermont

Title:Montpelier District HeatingCity of Montpelier, VT02700 – Sewerage and DrainageIssue Date:September 28, 2012Page #:6 of 102.6 CLEANOUTSA. Description: In areas that will see vehicular traffic ASME A112.36.2M, with roundflanged, castiron housing, and secured, scoriated, MediumDuty Loading class, castironcover. Include castiron ferrule and countersunk, brass cleanout plug.B. In lawn areas PVC risers and caps may be used.PART 3EXECUTION3.1 EARTHWORKA. Excavating, trenching, and backfilling are specified in Division 2 Section 02200"Earthwork."3.2 SEWERAGE PIPING APPLICATIONSA. General: Include watertight joints.B. Refer to Part 2 of this Section for detailed specifications for pipe and fitting productslisted below. Use pipe, fittings, and joining methods according to the followingapplications.C. Pipe Sizes 4 and 6 Inches (100 and 150 mm): ASTM D 3034, polyvinyl chloride (PVC)sewer pipe and fittings; solventcemented joints; or with gaskets and gasketed joints.D. Pipe Sizes 4 to 15 inches (100 to 375 mm): ASTM D 3034, polyvinyl chloride (PVC)sewer pipe and fittings; solventcemented joints; or with gaskets and gasketed joints.PVC resin compound shall comform to ASTM D 1784 and rubber gaskets shall conformto ASTM D 3212 and F 477.3.3 DRAINAGE PIPING APPLICATIONSA. General: Include watertight, silttight, or soiltight joints, except where watertight orsilttight joints are indicated.B. Refer to Part 2 of this Section for detailed specifications for pipe and fitting productslisted below. Use pipe, fittings, and joining methods according to the followingapplications.C. Pipe Sizes 8 to 15 Inches (200 to 375 mm): AASHTO M 252 Interim, corrugated,polyethylene (PE) drainage tubing and fittings; corrugated, soiltight couplings; andsoiltight, coupled joints in sizes 8 and 10 inches (200 and 250 mm). AASHTO M 294SEWERAGE AND DRAINAGE 02700 6