12.07.2015 Views

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

Specifications - City of Montpelier, Vermont

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Title:<strong>Montpelier</strong> District Heating<strong>City</strong> <strong>of</strong> <strong>Montpelier</strong>, VT33615 – Hot Water Pipe Distribution SystemIssue Date:September 25, 2012Page #:4 <strong>of</strong> 181. Preinsulated Steel Pipe:a. Verification <strong>of</strong> current EN 253 certification for pipe manufacturerb. Manufacturer quality test report samples from 2011/2012 displayingconformance to current EN 253 for: Polyethylene Casing Polyurethane Foam Insulation Pipe Assembly Radial Creep Behavior Of Polyurethane Foam InsulationThermal Conductivity <strong>of</strong> PreInsulated PipesVerification <strong>of</strong> Calculated Continuous Operating Temperature(CCOT) <strong>of</strong> PreInsulated Pipesc. Verification tests or certification letter indicating that fittings meet EN448 Standardsd. Verification tests or certification letter indicating that valve assembliesmeet EN 488 Standards.e. Verification tests or certification letter indicating that insulation forjoints and HDPE joint coverings have been tested to perform underlaboratory conditions, according to EN 489 and EN 253 Standardsf. Verification tests or certification letter indicating that leakdetection/surveillance wiring meets EN 14419 and EN 253 Standards2. Manufacturer's Installation Instructions: Indicate trenching methods,jointing procedures, and backfill recommendations.3. Qualifications: Manufacturer shall submit documentation verifying aminimum <strong>of</strong> ten years experience manufacturing thinwalled, Europeanstyle, preinsulated district heating systems.4. Expansion Board: Include manufacturer and product data.5. Leak Detection Monitoring Systems: Indicate the manufacturer and type<strong>of</strong> system as noted in Section 2.5(E).E. Special Reports: Submittal <strong>of</strong> special reports as required defined in this Sectionfor the following items:1. Alignment and Grade Report (Survey Points File)2. Record Drawing/Isometric SketchF. Testing Report: A Submittal which reports the result <strong>of</strong> the following requiredtests:1. Field Density Tests1.6 PIPE JOINTING PROCEDURESA. All shop and field welding and brazing shall be in conformity with therequirements <strong>of</strong> ANSI B31.1 and the supplementary requirements specified hereinHOT WATER PIPE DISTRIBUTION SYSTEM336154

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!