2 - Fagor Automation

Installation
8.
INSTALLATION
Location
312
DDS
HARDWARE
Ref.1307
270
Electrical considerations
MANDATORY. The electrical installation my comply with standard EN
60204-1.
Indications regarding EMC
Electromagnetic compatibility is covered by the following standards:
T. H8/2 Standards regarding electromagnetic compatibility.
EN 61800-3:2004 * Adjustable speed electrical power drive systems-
Part 3: EMC requirements and specific test methods.
EN 61326-3-1:2008 Electrical equipment for measurement, control
and laboratory use - EMC requirements - Part 3-
1: Immunity requirements for equipment performing
or intended to perform safety related functions
(functional safety) - General industrial
applications.
* MANDATORY. The installation that includes this servo system may need
a harmonic suppressing filter to comply with the standard EN 61800-
3:2004 which is harmonized with the EMC Directive. Otherwise, when applying
solutions to limit the harmonics in each servo system included in
the installation (except in systems with RPS, that would not require them)
could be an expensive solution and/or would not make any technical
sense. It is better to apply a global solution.
MANDATORY. The EMC directive defines equipment as any device or
fixed installation. This device is identified as a fixed installation and is
meant to work inside an electrical cabinet according to category C3 and
meeting the EN 61800-3 standard.
MANDATORY. These Power Drive Systems are not meant to be used in a
low voltage public mains that supplies energy to house installations. Radio
frequency disturbances may be expected when used in this case.