2 - Fagor Automation

Sales references
12.
SALES REFERENCES
References of compact drives
378
DDS
HARDWARE
Ref.1307
370
12.4 References of compact drives
Sales reference of the compact drives for synchronous axis servo motors,
ACD.
AXIS COMPACT DRIVE, ACD
AXIS COMPACT DRIVE
SIZE
Width (mm)
(Models)
CURRENT (A)
Irated / Ipeak
fc: IGBT's switching
frequencies.
INTERFACE
ADDITIONAL
FEEDBACK
FEATURES
MOTOR
FEEDBACK BOARD
1 77 mm (08/15/25)
2 177 mm (35/50)
for fc = 4 kHz for fc = 8 kHz
08 4.0 8.0 08 4.0 8.0
15
25
35
7.5 15.0
12.5 25.0
17.5 35.0
15
25
35
7.5 15.0
9.5 19.0
17.5 35.0
50 25.0 50.0 50 20.0 40.0
A1
S0
SI
C0
Analog I/O
SERCOS
SERCOS and Analog I/O
CAN
0 None
1 Encoder simulator
2 Direct feedback
None CAPMOTOR-1
B CAPMOTOR-2
F. H12/6
Sales reference of the ACD compact drive.
Sales reference of the compact drives for synchronous or asynchronous
spindle motors, SCD.
F. H12/7
Sales reference of the SCD compact drive.
Example:
ACD 2 . 50 - C0 - 2 - B
Note. Models with CAN interface (C0) cannot have an encoder simulator board, in other words,
there are no models with references like ACD X.XX- C0 -1-X
Examples:
ACD 1.25-C0-2-A Compact axis drive, size 1, with a peak current of 25 A at 4 kHz, with CAN board,
with Direct feedback board and with CAPMOTOR-1 motor feedback board.
ACD 1.25-C0-2-B Compact axis drive, size 1, with a peak current of 25 A at 4 kHz, with CAN board,
with Direct feedback board and with CAPMOTOR-2 motor feedback board.
ACD 1.08-C0-2 Compact axis drive, size 1, with a peak current of 8 A at 4 kHz, with CAN board,
with Direct feedback board and with CAPMOTOR-1 motor feedback board.
COMPACT SPINDLE DRIVE, SCD
SPINDLE COMPACT DRIVE
SIZE
Width mm
(Models)
CURRENT (A)
Imax. in any
duty cycle
fc: IGBT's
switching
frequencies
INTERFACE
ADDITIONAL
FEEDBACK
FEATURES
MOTOR
FEEDBACK BOARD
BRAKING
RESISTOR
1 77 mm (15/25)
2 177 mm (35/50/75)
for fc = 4 kHz for fc = 8 kHz
15 10.6
15 10.6
25 17.5
25 12.5
35 28.0
35 19.5
50 38.0
50 27.0
75 52.0
75 39.0
A1 Analog I/O
S0 SERCOS
SI SERCOS and analog I/O
C0 CAN
0 None
1 Encoder simulator
2 Direct feedback
None CAPMOTOR-1
B CAPMOTOR-2
None Includes external Ballast resistor
NR Does not include external Ballast resistor
Example: SCD 2.50-C0-2-B-NR
Note. Models with CAN interface (C0) cannot have an encoder simulator board, in other words,
there are no models with references like SCD X.XX- C0 -1-X.
Examples.
SCD 2.50-C0-2 Compact spindle drive, size 2, with Imax of 50 A at 4 kHz, with CAN board,
with Direct feedback board and with CAPMOTOR-1 motor feedback board.
SCD 2.50-C0-2-B Compact spindle drive, size 2, with Imax of 50 A at 4 kHz, with CAN board,
with Direct feedback board and with CAPMOTOR-2 motor feedback board.