2 - Fagor Automation

COMPATIBILITY
13.1 Mains voltage
13.2 Compatibility
13
Originally, the drives and power supplies were designed for a mains voltage
of 380 V AC (50/60 Hz). They all have been now redesigned to work
with mains voltage ranging between 400-460 V AC (50/60 Hz).
Their identification comes on the label that each of these module has.
Power supplies
Drives
Elements for 380 V AC
Fagor Automation,
S.Coop.(Spain)
MODEL PS-25
INPUT 3x380 Vac 50/60Hz
OUTPUT 600 Vdc 45A
Fagor Automation,
S.Coop.(Spain)
MODEL AXD 1.15-A1-1
INPUT 600-800 Vdc
OUTPUT 3x380 Vac 7A 0-800Hz
Fagor Automation,
S.Coop.(Spain)
F. H13/1
Module identification labels. Operating mains voltage.
Elements for 400- 460 V AC
MODEL PS-25A
INPUT 3x400÷460Vac 50/60Hz
OUTPUT 537-650 Vdc 45A
Fagor Automation,
S.Coop.(Spain)
MODEL AXD 1.15-A1-1
INPUT 456-800 Vdc
3x0÷460 Vac 7A
OUTPUT 0-800Hz
The elements ready for mains voltage between 400-460 V AC:
Drive (version MSC 12A and later).
Auxiliary power supply APS-24 ( version PF 05A and later ).
Capacitor module CM 60 (version 01A and later) or CM 1.60 (version
[CAP 00A] [VAR 02A] and later) replacing the previous one.
Mains filters EMK or MAINS FILTER A compatible with all power
supplies PS, XPS and RPS.
The elements ready for mains voltage between 380 V AC:
Drive (version MSC 11A and older).
Auxiliary power supply APS 24 (version PF 04A and older).
Capacitor module CM 60 (version 00A and later) or CM 1.60 (version
[CAP 00A] [VAR 02A] and later) replacing the previous one.
Mains filters Power-Pro are not compatible with power supplies PS-
A, PS-25B, XPS and RPS.
DDS
HARDWARE
Ref.1307
379