2 - Fagor Automation

Power supplies
2.
POWER SUPPLIES
94
72
Regenerative regulated power supplies
DDS
HARDWARE
Ref.1307
Operating cycles
Load cycle S1
Continuous duty. Operation with constant load and long enough to
achieve thermal balance.
PN
F. H2/32
Load cycle S1.
Load cycle S6-40%
Periodic uninterrupted duty cycle with intermittent load. Succession
of identical duty cycles, each with a running period under constant load
and another period without load. There is no rest period. The 40% running
factor indicates that for a 10 minute cycle, it works at constant power
for 4 minutes P S6-40% and without load for 6 minutes (0.4 x rated current
Pn).
PMAX
PS6-40
PN
0.4xPN
POWER
POWER
F. H2/33
Load cycle S6-40%.
Cycle at Pmax without previous load
Periodic intermittent duty. Succession of identical duty cycles, each with a
rest period. The 40% running factor means that for a 10 minute cycle, it
works at 1.6xPn for 4 minutes and it rests (no power) for 6 minutes.
1.6xPN
PN
POWER
10 MIN
4 MIN
10 MIN
4 MIN
F. H2/34
Cycle at Pmax without previous load.
LOAD CYCLE S1
TIME
LOAD CYCLE S6-40%
TIME
CYCLE AT Pmax WITHOUT PREVIOUS LOAD
TIME