2 - Fagor Automation

Sales references
12.
SALES REFERENCES
References of asynchronous motors
378
DDS
HARDWARE
Ref.1307
368
12.2 References of asynchronous motors
Sales reference of the asynchronous motors, FM7.
FAGOR M7 MOTOR
BASE SPEED (SINGLE WINDING)
FM7- - - E0
1500 REV/MIN A
1000 REV/MIN B
500 REV/MIN C
1250 REV/MIN E
POWER (S1 DUTY CYCLE).
Note. The kW for each model are obtained from multiplying the given
value by 0.1. E.g.. An FM7- B280 motor can supply up to 28 kW in the
S1 duty cycle.
A 037 - 055 - 075 - 090 - 110 - 150 - 185 - 220 - 300 - 370 - 510
B 120 - 170 - 220 - 280
C 215 - 270
E 600
FEEDBACK
(see note 3)
MOUNTING
(see note 1)
STANDARD ENCODER S
C AXIS ENCODER C
FLANGE 1
FOOT
3
FLANGE+FOOT 5
VIBRATION
DEGREE V10 B
V5
C
(see note 3)
V3
D
SHAFT
RELEASE
(see note 2)
FAGOR M7 MOTOR
PLAINT SHAFT (NO KEYWAY) 0
KEYWAY
(HALF-KEY BALANCING)
E01 SERIES
E02 SERIES
BASE SPEED
(option to configure the winding connection)
POWER (S1 DUTY CYCLE).
Note. The kW for each model are obtained from multiplying the given
value by 0.1. E.g. An FM7- D150 motor can supply up to 15 kW in the
S1 duty cycle.
D 055 - 075 - 110 - 150 - 185 - 220
FEEDBACK
RELEASE
MAGNETIC TTL ENCODER S
E03 SERIES
HS3 SERIE (hollow shaft)
F. H12/3
Sales reference of the asynchronous motors, FM7.
D
1
1
2
NOTE 1. The "flange + foot" mount type comes in all models except
A037, A055, A075 and A090. NOTE 2. Models A300, A370, B220,
B280 and E600 are not available for the E02 series. NOTE 3. E600
models can only have the C axis option for feedback and V10 vibration
degree.
1500 rev/min - star connection -
1000 rev/min - triangle connection -
MOUNTING
VIBRATION
DEGREE
SHAFT
FLANGE 1
V3 D
PLAINT SHAFT (NO KEYWAY) 0
FM7- - - 3
E0
HS
NOTE 4. The FM7-D055 and FM7-D150 models will not be available in
the HS3 series.