2 - Fagor Automation

T. H3/5 Technical characteristics of the modular drives.
AXD/SPD/MMC
1.08 1.15 1.25 1.35 2.50 2.75 2.85 3.100 3.200
3.150 3.250
Power voltage input 542 - 800 V DC
Power to control circuits 24 V DC (between 21 V DC and 28 V DC)
Consumption of the control
circuits (24 V DC)
0.90 A 1.25 A 2.00 A
Speed feedback Encoder
Controlling method PWM, AC sinewave, vector control
Communication Serial line to connect to a PC
Standard analog, digital SERCOS ring (in all models)
Interface
CAN bus (in all models).
Serial line RS-232/422 (only in MMC drives)
Status display 7-segments display
Protections
Over-voltage, over-current, over-speed, heat-sink temperature,
ambient temperature, motor temperature, hardware error, overload.
Speed range with analog input 1:8192
Current bandwidth 800 Hz
Speed bandwidth 100 Hz (depends on the motor/drive set)
Ambient temperature
Between 5 °C and 45 °C (41 °F/113 °F)
From 40 ºC (104 ºF) on. See derating curves.
Storage temperature Between - 20 °C and + 60 °C (- 4 °F/140 °F)
Sealing IP 20
Maximum humidity < 90% (non condensing at 45 °C/113 °F)
Operating vibration 0.5 G
Shipping vibration 2 G
Approx. mass in kg
lb
5.5
(12.1)
6.0
(13.2)
6.5
(14.3)
9.0
(19.8)
9.0
(19.8)
10.0
(22.0)
14.0
(30.8)
Drive modules
19.5
(43.0)
DRIVE MODULES
Modular drives 3.
DDS
HARDWARE
Ref.1307
99