2 - Fagor Automation

DECLARATION OF
CONFORMITY
Manufacturer Fagor Automation S.Coop.
Bº San Andrés 19; C.P. 20500, Mondragón, Gipuzkoa - Spain.
We hereby declare, under our responsibility the conformity of the product:
LOW VOLTAGE DIRECTIVE
IEC 60204-1:2005 +A1:
2009
ELECTROMAGNETIC COMPATIBILITY
IEC 61800-3:
2004
IEC 61326-3-1:
2008
SAFETY OF MACHINERY
FAGOR DDS SERVO DRIVE SYSTEM
7
Fagor Automation, S. Coop.
consisting of the following modules and accessories:
APS-24, PS-25B4, PS-65A, XPS-25, XPS-65,
RPS-80, RPS-75, RPS-45, RPS-20
AXD/SPD 1.08, 1.15, 1.25, 1.35, 2.50, 2.75, 2.85, 3.100, 3.150, 3.200, 3.250
ER+TH, ER+TH-18/x+FAN, CM 1.60, CHOKE
MAINS FILTER 42A, MAINS FILTER 130A, MAINS FILTER 180A
FXM, FKM, FM7, FM9
Note. Some additional characters may follow the model references indicated above.
They all comply with the directives listed here. However, compliance may be verified on
the label of the unit itself.
mentioned on this declaration, meet the requirements on:
Machinery safety. Electrical equipment of the machines.
Part 1: General requirements.
Category C2. Specific standard on electromagnetic compatibility for servo
drive systems.
(In “Safety Related Parts”). Electrical equipment for measurement, control
and laboratory use - EMC requirements - Part 3-1: Immunity requirements for
safety-related systems and for equipment intended to perform safety-related
functions (functional safety) - General industrial applications.
STO (Safe Torque Off) function satisfies the requirements:
IEC 61800-5-1:2007
IEC 61800-5-2:2007 (SIL 2)
IEC 61508-1:1998 (SIL 2)
IEC 61508-2:2000 (SIL 2)
IEC 61508-3:1998 (SIL 2)
IEC 61508-4:1998 (SIL 2)
ISO 13849-1:2006 + Cor 1:2009: Category 3, for Performance Level PL d
EC-Type-Examination: TÜV SÜD, Notified Body 0123
Certificate No.: Z10 12 06 80353 001
In compliance with EC Directives 2006/95/EC on Low Voltage, Directive 2006/42/EC on Machinery and
2004/108/EC on Electromagnetic Compatibility.