ABI Prism® 7900HT Sequence Detection System ... - OpenWetWare

To define the positions of the remaining stacks: (continued)
Step Action
8 Using the Vertical Positioning commands, raise and lower plate handler arm several
times to check the alignment.
9 Click Rotary Offset, andclickYes.
The software records the rotary position for the Zymark position 5 (input stack 2).
10 Repeat steps 1–8 for input stacks 3 and 4 to define Rotary Offset values for the
remaining positions 6 and 7:
Zymark position 7
(input stack 4)
Zymark position 6
(input stack 3)
11 Exit the Zymark Twister Software.
a. Click Main Menu.
The software displays the main menu.
b. Click Exit.
The software closes.
12 Note A bug in the Zymark Twister Software can cause portions of the program to
persist in memory even after the software has been closed. Because the Zymark
Twister Software conflicts with the SDS software, these residual elements must be
closed within the Windows Task Manager before continuing.
Confirm that the Zymark Twister Software has closed by viewing the Task Manager.
a. Press the Ctrl + Alt + Del keys in unison.
The Windows Security dialog box appears.
b. Click Task Manager.
The Task Manager dialog box appears.
c. Confirm that the Twister software has closed by looking for the Twister software
entry in the Task list. If the software is still running, click the software entry and
click End Task to exit the software.
d. From the File menu, select Exit to quit the Task Manager.
13 Replace the covers for the fixed-position bar code reader and the underlying
platform (removed in step 1 on page 7-32).
GR2009
Fixed-position bar code reader
and underlying platform covers
System Maintenance 7-39