ABI Prism® 7900HT Sequence Detection System ... - OpenWetWare

Saving the Plate Document
Saving the Plate
Document for Single
Plate Operation
4-22 Run Setup and Basic Operation
Before the plate document can be run, you must save it as an ABI PRISM SDS Single
Plate (*.sds) file.
To save the plate document:
Step Action
1 From the File menu of the SDS software, select Save As.
The Save As dialog box appears.
2 From the Look in text field, navigate to and select a directory for the software to
receive the new file.
3 Click the File name text field and either:
♦ Type a file name for the plate document file, or
♦ Type or scan the bar code number for the plate into the text field.
Note The SDS software does not require that the file name match the bar code of
the corresponding plate.
4 Click Save.
The software saves the plate document to the specified directory.
5 Run the plate document and associate plate as explained on page 4-23.