21.03.2013 Views

Aircraft Operations. Volume II - Construction of Visual and Instrument ...

Aircraft Operations. Volume II - Construction of Visual and Instrument ...

Aircraft Operations. Volume II - Construction of Visual and Instrument ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Part <strong>II</strong> — Section 2, Chapter 4 <strong>II</strong>-2-4-3<br />

4.5.2 Off-aerodrome facility — Circling approach<br />

The MAPt is located at a point on the final approach track which is not farther from the FAF than the first usable<br />

portion <strong>of</strong> the l<strong>and</strong>ing surface.<br />

4.5.3 On-aerodrome facility<br />

The MAPt is located at a point on the final approach track which is not farther from the FAF than the facility.<br />

4.6 PROMULGATION<br />

The general criteria in Part I, Section 2, Chapter 1, 1.10, “Promulgation” apply. The instrument approach chart for a<br />

VOR approach procedure shall be identified by the title VOR RWY XX. If a DME is required it shall be indicated in a<br />

note on the chart. When a DME has been used to obtain lower minima, no additional note is required as this shall be<br />

shown in the minimum boxes. If a DME is used to define the distance/height relationship for a pr<strong>of</strong>ile descent, the<br />

information shall be published on the chart, preferably in increments <strong>of</strong> 2 km (1 NM). If separate approach charts are<br />

published for different aircraft categories, the Duplicate Procedure Title convention shall be applied, with the approach<br />

having the lowest minima being identified as ILS RWY XX, LLZ RWY XX, VOR Z RWY XX, NDB Y RWY XX, etc.<br />

A note shall be included on the chart detailing the applicable aircraft categories.<br />

Table <strong>II</strong>-2-4-1. Minimum length <strong>of</strong> final approach segment<br />

after a turn over the FAF<br />

<strong>Aircraft</strong> category Magnitude <strong>of</strong> turn over FAF<br />

10° 20° 30° 60°<br />

A 1.9 km (1.0 NM) 2.8 km (1.5 NM) 3.7 km (2.0 NM) —<br />

B 2.8 km (1.5 NM) 3.7 km (2.0 NM) 4.6 km (2.5 NM) —<br />

C 3.7 km (2.0 NM) 4.6 km (2.5 NM) 5.6 km (3.0 NM) —<br />

D 4.6 km (2.5 NM) 5.6 km (3.0 NM) 6.5 km (3.5 NM) —<br />

E 5.6 km (3.0 NM) 6.5 km (3.5 NM) 7.4 km (4.0 NM) —<br />

H 1.9 km (1.0 NM) 2.8 km (1.5 NM) 3.7 km (2.0 NM) 5.6 km (3.0 NM)<br />

This table may be interpolated. If turns <strong>of</strong> more than 30° (Cat H, 60°) are required, or if the minimum<br />

lengths specified in the table are not available for the procedure, straight-in minimums are not authorized.<br />

23/11/06

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!