Specifications - Lord and Son Construction, Inc.

SECTION 06 10 00 – ROUGH CARPENTRY
PART 1 – GENERAL
1.1 SUMMARY
A. Rough carpentry includes carpentry work not specified as part of other sections
and which is generally not exposed, except as otherwise indicated. Types of work
in this Section include rough carpentry for:
1. Framing lumber and plywood
2. Wood nailers and blocking
3. Other rough carpentry indicated
B. Related Sections include the following:
1.2 REFERENCES
1. Division 6 Section “Solid Polymer (Solid Surfacing) Fabrications”
A. Lumber Standards: Comply with PS 20
B. Plywood Performance Standards: Must comply with PS2-92 and APA
Performance Rating Standards.
C. Factory mark each piece of lumber and plywood with type, grade, mill and grading
agency
D. Forest Certification: Provide wood components produced from wood obtained
from forests certified by an Forest Stewardship Council (FSC) accredited
certification body to comply with FSC 1.2, “Principles and Criteria”. (www.fscus.org)
1.3 DELIVERY STORAGE, AND HANDLING
A. Keep materials dry at all times. Protect against exposure to weather and contact
with damp or wet surfaces. Stack lumber and provide air circulation within stacks.
1.4 PROJECT CONDITIONS
A. Fit carpentry work to other work; scribe and cope as required for accurate fit.
Correlate location of furring, nailers, blocking, and similar supports to allow proper
attachment of other work.
MAHG121038 06 10 00 - 1 ROUGH CARPENTRY