Specifications - Lord and Son Construction, Inc.

n. Solvent Cement for Transition Joints between ABS and PVC Nonpressure
Piping Components: ASTM D 3138.
o. Plastic Solvent Cement for ABS Plastic Pipe: ASTM D 2235.
p. Plastic Solvent Cement for PVC Plastic Pipe: ASTM D 2564 and ASTM D
2855.
q. Plastic Solvent Cement for CPVC Plastic Pipe: ASTM F 493.
r. Flanged fittings including flanges, bolts, nuts, bolt patterns, etc.,
shall be in accordance with ASME B16.5 class 150 and shall have the
manufacturer's trademark affixed in accordance with MSS SP-25. Flange
material shall conform to ASTM A 105/A 105M. Blind flange material
shall conform to ASTM A 516/A 516M cold service and ASTM A 515/A 515M
for hot service. Bolts shall be high strength or intermediate strength
with material conforming to ASTM A 193/A 193M.
s. Plastic Solvent Cement for Styrene Rubber Plastic Pipe: ASTM D 3122.
t. Press fittings for Copper Pipe and Tube: Copper press fittings shall
conform to the material and sizing requirements of ASME B16.18 or ASME
B16.22 and performance criteria of IAPMO PS 117. Sealing elements for
copper press fittings shall be EPDM, FKM or HNBR. Sealing elements
shall be factory installed or an alternative supplied fitting
manufacturer. Sealing element shall be selected based on
manufacturer's approved application guidelines.
u. Copper tubing shall conform to ASTM B 88, Type K, L or M.
2.1.2 Miscellaneous Materials
Miscellaneous materials shall conform to the following:
a. Water Hammer Arrester: PDI WH 201. Water hammer arrester shall be
diaphragm or piston type.
b. Copper, Sheet and Strip for Building Construction: ASTM B 370.
c. Asphalt Roof Cement: ASTM D 2822.
d. Hose Clamps: SAE J1508.
e. Supports for Off-The-Floor Plumbing Fixtures: ASME A112.6.1M.
f. Metallic Cleanouts: ASME A112.36.2M.
g. Plumbing Fixture Setting Compound: A preformed flexible ring seal
molded from hydrocarbon wax material. The seal material shall be
nonvolatile nonasphaltic and contain germicide and provide watertight,
gastight, odorproof and verminproof properties.
Section 22 00 00 Page 17