Specifications - Lord and Son Construction, Inc.

SECTION 10 28 00 – TOILET AND BATH ACCESSORIES
PART 1 – GENERAL
1.1 SUMMARY
1.2 SUBMITTALS
A. Provide toilet and other accessory items in locations as indicated on the Drawings
and as specified in the schedule herein.
1. Refer to Toilet Accessory Schedule on Drawings for complete schedule.
2. Contractor to coordinate installation and provide blocking in wall for all items
specified.
A. Product Data
1. For each accessory item specified, including details of construction relative to
material, dimensions, gauges, profiles, method of mounting, specified options,
and finishes.
B. Setting Drawings:
1. Where cutouts are required in other work, provide templates, substrate
preparation instructions, and directions for preparing cutouts and for
installation of anchorage devices.
1.3 QUALITY ASSURANCE
A. Inserts and anchorages: Furnish inserts and anchoring devices that must be set in
concrete or built into masonry; coordinate delivery with other work to avoid delay.
B. Accessory Locations: Coordinate accessory locations with other work to avoid
interference and to assure proper operation and servicing of accessory units.
C. Single-Source Responsibility: Provide products of same manufacturer for each
type of accessory unit and for units exposed to view in same areas, unless
otherwise acceptable to Architect.
D. Comply with 36 CFR 1191 "Americans with Disabilities Act Accessory Guidelines
for Buildings and Facilities" including requirement regarding location and installed
structural strength of grab bars.
MAHG121038 10 28 00-1 TOILET AND BATH ACCESSORIES