Specifications - Lord and Son Construction, Inc.

21 Process glass pipe and fittings, X
ASTM C 1053
22 High-silicon content cast iron pipe X X X
and fittings (hub and spigot, and
mechanical joint), ASTM A 518/A 518M
23 Polypropylene (PP) waste pipe and X
fittings, ASTM D 4101
24 Filament-wound reinforced thermosetting X
resin (RTRP) pipe, ASTM D 2996
SERVICE:
A - Underground Building Soil, Waste and Storm Drain
B - Aboveground Soil, Waste, Drain In Buildings
C - Underground Vent
D - Aboveground Vent
E - Interior Rainwater Conductors Aboveground
F - Corrosive Waste And Vent Above And Belowground
* - Hard Temper
TABLE II
PIPE AND FITTING MATERIALS FOR PRESSURE PIPING SYSTEMS
--------------------------------------------------------------------------
SERVICE
--------------------------------------------------------------------------
Item No. Pipe and Fitting Materials A B C D
--------------------------------------------------------------------------
1 Malleable-iron threaded fittings, X X X X
a. Galvanized, ASME B16.3
for use with Item 4a
b. Same as "a" but not galvanized X
for use with Item 4b
2 Grooved pipe couplings, ferrous pipe X X X
ASTM A 536 and ASTM A 47/A 47M,
non-ferrous pipe, ASTM A 536
and ASTM A 47/A 47M,
3 Ductile iron grooved joint fittings X X X
for ferrous pipe ASTM A 536
and ASTM A 47/A 47M, for use
with Item 2
4 Steel pipe: X X X X
a. Seamless, galvanized,
ASTM A 53/A 53M, Type S, Grade B
b. Seamless, black, X
ASTM A 53/A 53M,
Type S, Grade B
Section 22 00 00 Page 51