Specifications - Lord and Son Construction, Inc.

SECTION 09 65 19 – RESILIENT TILE FLOORING
PART 1 – GENERAL
1.1 SUMMARY
1.2 SUMBITTALS
A. Extent of resilient flooring and accessories is shown on Drawings and in
schedules. Work includes the following:
1. Static Dissipative Vinyl composition tile
2. Vinyl Composition Tile
3. Accessories including rubber base.
4. Patterns and locations of all flooring and accessories are as indicated on the
Drawings. Colors shall be selected by the Contracting Officer.
B. Related Sections include the following:
1. Division 9 Section “Tiling”
2. Division 9 Section “Carpeting”
A. Product Data: Provide Safety Data Sheets for floor tile and adhesives.
B. Samples: Submit sample of each type, color and finish of resilient flooring and
accessory required, indicating full range of color and pattern variation. Provide
full-size tile units for SDT/VCT and 6" long sample of accessories.
C. Maintenance Instructions: Submit 2 copies of manufacturer's recommended
maintenance practices for each type of resilient flooring and accessory required.
1.3 QUALITY ASSURANCE
A. Manufacturer: Provide each type of resilient flooring and accessories as produced
by a single manufacturer, including recommended primers, adhesives and
sealants.
B. Provide resilient flooring material to meet the following fire test performance
criteria as tested by a recognized independent testing laboratory:
1. ASTM E 648 Critical Radiant Flux of 0.45 watts per sq. cm. or greater, Class I.
MAHG121038 09 65 19 - 1 RESILIENT TILE FLOORING