Specifications - Lord and Son Construction, Inc.

B. Toilet Accessory Schedule Symbol / Manufacturer / Model No.:
1. A - 36” Grab Bar: equal to Bobrick, No. B-6806x36
2. B - 42” Grab Bar: equal to Bobrick, No. B-6806x42
3. I - 24” x 36” Grab Bar: equal to Bobrick, No. B-68616
2.4 TOILET PAPER DISPENSER
A. Fabricate of stainless steel with all-welded construction; exposed surfaces shall
have satin finish. Door shall be secured to cabinet with two rivets and equipped
with a flush tumbler lock. Unit shall dispense two standard-core toilet tissue rolls
up to 5-1/4” diameter. Extra roll shall automatically drop in place when bottom roll
is depleted. Spindles shall be theft-resistant, one-piece, molded ABS.
B. Mountings: Concealed type, manufacturer’s standard.
C. Controlled delivery not permitted.
D. Mounting Height: 28” to top of unit
E. Toilet Accessory Schedule Symbol / Manufacturer / Model No.:
2.5 MIRROR UNITS
1. C – Multi Roll Toilet Tissue Dispenser: equal to Bobrick No. B-2888
A. Stainless Steel Framed Mirror Units: Fabricate frame with angle shapes of not
less than 18 gauge with square welded corners mitered and ground smooth.
Provide with No. 4 satin polished finish. 1/4 inch tempered glass.
B. Mountings: Concealed type, manufacturer’s standard.
C. Toilet Accessory Schedule Symbol / Manufacturer / Model No.:
1. D - 18 inch wide x 36 inch high: equal to Bobrick No. B-290 1836
2.6 PAPER TOWEL DISPENSER AND WASTE RECEPTACLE
A. Surface-mounted touch-free roll towel dispenser and waste receptacle shall be
constructed of type-304 stainless steel with satin finish and all-welded
construction. Flange shall be 22-gauge, drawn and beveled, one-piece, seamless
construction. Cabinet shall be equipped with an interior stainless steel shelf. Door
shall be 18-gauge stainless steel and shall be secured to cabinet with a full-length,
stainless steel piano-hinge and equipped with two tumbler locks.
B. Touch-free, pull-towel mechanism dispenses one 12" length of towel per pull.
Accommodates up to 8" diameter rolls, 800 ft long. Roll paper towel mechanism
shall have automatic towel transfer system to dispense towels from stub roll up to
3-1/2" diameter before new roll starts to dispense. Lever shall be operable with
one hand and with less than 5 lb of force. R
MAHG121038 10 28 00-3 TOILET AND BATH ACCESSORIES