Specifications - Lord and Son Construction, Inc.

ASTM B 766
ASTM C 553
ASTM D 1654
ASTM D 3359
ASTM D 520
(1986; R 2008) Standard Specification for
Electrodeposited Coatings of Cadmium
(2008) Standard Specification for Mineral
Fiber Blanket Thermal Insulation for
Commercial and Industrial Applications
(2008) Evaluation of Painted or Coated
Specimens Subjected to Corrosive Environments
(2009) Measuring Adhesion by Tape Test
(2000; R 2005) Zinc Dust Pigment
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA MG 1
NEMA MG 10
NEMA MG 11
(2007; Errata 2008) Standard for Motors and
Generators
(2001; R 2007) Energy Management Guide for
Selection and Use of Fixed Frequency Medium
AC Squirrel-Cage Polyphase Induction Motors
(1977; R 2007) Energy Management Guide for
Selection and Use of Single Phase Motors
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 90A
(2008; Errata 2009) Standard for the
Installation of Air Conditioning and
Ventilating Systems
SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
(SMACNA)
SMACNA 1966
(2005) HVAC Duct Construction Standards Metal
and Flexible
U.S. DEPARTMENT OF DEFENSE (DOD)
UFC 4-010-01
(2003; Change 1 2007) DoD Minimum
Antiterrorism Standards for Buildings
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
40 CFR 82 Protection of Stratospheric Ozone
UNDERWRITERS LABORATORIES (UL)
UL 181
UL 214
(2005; Rev thru Oct 2008) Standard for
Factory-Made Air Ducts and Air Connectors
(1997; Rev thru Aug 2001) Tests for Flame-
Propagation of Fabrics and Films
Section 23 00 00 Page 2