Specifications - Lord and Son Construction, Inc.

21 CFR 175 Indirect Food Additives: Adhesives and
Components of Coatings
40 CFR 50.12 National Primary and Secondary Ambient Air
Quality Standards for Lead
PL 109-58
Energy Policy Act of 2005 (EPAct05)
UNDERWRITERS LABORATORIES (UL)
UL 174
(2004; Rev thru Apr 2009) Household Electric
Storage Tank Water Heaters
1.2 SUBMITTALS
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for information only. When
used, a designation following the "G" designation identifies the office that
will review the submittal for the Government. The following shall be
submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
SD-03 Product Data
Plumbing System; G,
Detail drawings consisting of schedules, performance charts,
instructions, diagrams, and other information to illustrate the
requirements and operations of systems that are not covered by the
Plumbing Code.. Detail drawings for the complete plumbing system
including piping layouts and locations of connections; dimensions
for roughing-in, foundation, and support points; schematic diagrams
and wiring diagrams or connection and interconnection diagrams.
Detail drawings shall indicate clearances required for maintenance
and operation. Where piping and equipment are to be supported
other than as indicated, details shall include loadings and
proposed support methods. Mechanical drawing plans, elevations,
views, and details, shall be drawn to scale.
Fixtures; (LEED)
List of installed fixtures with manufacturer, model, and flow
rate.
Flush valve water closets
Wall hung lavatories
Service sinks
Section 22 00 00 Page 11