Specifications - Lord and Son Construction, Inc.

C. Installation of Plywood:
1. General: Comply with applicable recommendations contained in Form No. E
304 "APA Design/Construction Guide - Residential & Commercial" for types of
plywood products and applications indicated.
2. Apply sheathing with long dimension (face grain) perpendicular to framing.
Apply with side edges 1/4 inch apart and end edges 1/8 inch apart. All end
edges of sheathing shall bear on a support. Stagger end joints of roof
sheathing.
3. For wood framing, nail to supports with 6d common nails spaced 6 inches on
center along edges and 12 inches on center at intermediate supports.
4. Use 11 gauge galvanized roofing nails 1-3/4" inches long with 7/16 inch heads
for wood framing. Fasteners shall be installed at 6" o.c. on panel edges, at
12" o.c. along intermediate supports, and 3/8" minimum from panel edge.
END OF SECTION
MAHG121038 06 10 00 - 5 ROUGH CARPENTRY