Specifications - Lord and Son Construction, Inc.

SECTION 23 31 13
METAL DUCTS
02/09
PART 1
GENERAL
1.1 REFERENCES
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 325
AISC 360
(2005) Manual of Steel Construction
(2005) Specification for Structural Steel
Buildings, with Commentary
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE EQUIP IP HDBK
ASHRAE FUN IP
(2004) Handbook, HVAC Systems and Equipment
(IP Edition)
(2009) Fundamentals Handbook, I-P Edition
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8/A5.8M
(2004; Errata 2004) Specification for Filler
Metals for Brazing and Braze Welding
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
ASTM A 36/A 36M
ASTM A 653/A 653M
ASTM A 924/A 924M
(2009) Standard Specification for Zinc (Hot-
Dip Galvanized) Coatings on Iron and Steel
Products
(2008) Standard Specification for Carbon
Structural Steel
(2009a) Standard Specification for Steel
Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip
Process
(2009a) Standard Specification for General
Requirements for Steel Sheet, Metallic-Coated
by the Hot-Dip Process
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
Section 23 31 13 Page 1