Specifications - Lord and Son Construction, Inc.

SECTION 23 64 26
CHILLED, CHILLED-HOT, AND CONDENSER WATER PIPING SYSTEMS
08/09
PART 1
GENERAL
1.1 REFERENCES
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)
ASSE 1003
ASSE 1017
(2001; Errata, 2003) Performance Requirements
for Water Pressure Reducing Valves
(2003; Errata 2004) Temperature Actuated
Mixing Valves for Hot Water Distribution
Systems
AMERICAN WATER WORKS ASSOCIATION (AWWA)
AWWA C606
(2006) Grooved and Shouldered Joints
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8/A5.8M
AWS BRH
(2004; Errata 2004) Specification for Filler
Metals for Brazing and Braze Welding
(2007) Brazing Handbook
AWS D1.1/D1.1M (2008; Errata 2009) Structural Welding Code -
Steel
AWS Z49.1
(2005) Safety in Welding, Cutting and Allied
Processes
ASME INTERNATIONAL (ASME)
ASME B1.20.1
ASME B16.1
ASME B16.11
ASME B16.18
(1983; R 2006) Pipe Threads, General Purpose
(Inch)
(2005) Standard for Gray Iron Threaded
Fittings; Classes 125 and 250
(2009) Forged Fittings, Socket-Welding and
Threaded
(2001; R 2005) Cast Copper Alloy Solder Joint
Pressure Fittings
Section 23 64 26 Page 1