Specifications - Lord and Son Construction, Inc.

G. Stile Shoe shall be one-piece, 4" high, type-304, 22-gauge stainless steel with
satin-finish. Top shall have 90° return to stile. Shoe will be composed of one-piece
of stainless steel and capable of being fastened (by clip) to stiles starting at wall
line.
H. Headrail (Overhead-Braced) shall be satin-finish, extruded anodized aluminum
(.065 thick) with antigrip profile.
2.4 FABRICATION
2.2 FINISHES
A. HDPE:
1. Doors and pilasters shall be a minimum of 1 inch thick and all edges
machined to a radius of .250 inch and all exposed surfaces to be free of saw
marks.
B. Doors and dividing panels shall be mounted 14 inches above finished floor –
overall height as indicated on drawings, or 55 inches high if not indicated.
C. Stainless steel edging strips to be fastened to the bottom edge of all doors and
panels using vandal proof stainless steel fasteners.
D. Doors at compartments with grab bars shall provide 32-inch clear opening width
when open to 90-degree position.
A. Color shall be as selected from manufacturer’s full line.
PART 3 – EXECUTION
3.1 EXAMINATION
A. Installer must examine areas and conditions under which compartments and
cubicles and related items are to be installed, including supporting anchors and
supports installed by others, and must notify Contractor in writing of conditions
detrimental to proper and timely completion of work. Do not proceed with work
until unsatisfactory conditions have been corrected in manner acceptable to
installer.
3.2 INSTALLATION
A. Doors and Pilasters:
1. General: Comply with manufacturer's recommended procedures and
installation sequence. Install doors and pilasters rigid, straight, plumb and
level. Provide clearances of not more than 1/2" between pilasters and walls.
Secure pilasters to walls with continuous brackets. Locate wall brackets so
that holes for wall anchorages occur in masonry or tile joints. Secure pilaster
in position with manufacturer's recommended anchoring devices.
MAHG121038 10 21 13 - 4 TOILET COMPARTMENTS