Specifications - Lord and Son Construction, Inc.

C. Removable stainless steel waste receptacle shall be equipped with a tumbler lock.
Front and side edges of bottom and all top edges of waste receptacle shall be
hemmed for safe handling with interior clips for securing vinyl liner. Waste
receptacle minimum capacity: 12-gal.
D. Mountings: Concealed type, manufacturer’s standard.
E. Toilet Accessory Schedule Symbol / Manufacturer / Model No.:
2.7 SOAP DISPENSER
1. E – equal to Bobrick No. B-39619 (with LinerMate)
2. All units to be fully stocked at Substantial Completion. This includes paper
towels and bags in waste receptacle.
A. Vertical tank with 40 fl oz capacity. Corrosion-resistant valve dispensing liquid and
lotion soaps and synthetic detergents.
B. Fabrication: 22-gauge stainless steel with satin finish. Body is drawn, one-piece
seamless construction. Clear acrylic refill-indicator window. Locked, hinged
stainless steel lid for top filling.
C. Mountings: Concealed type, manufacturer’s standard.
D. Toilet Accessory Schedule Symbol / Manufacturer / Model No.:
1. F – equal to Bobrick No. B-2111
2.8 SANITARY NAPKIN DISPOSAL
A. Fabricate of stainless steel with all-welded construction; exposed surfaces shall
have satin finish. Cover shall be one piece seamless construction secured to
container with a full-length stainless steel piano-hinge.
B. Mountings: Concealed type, manufacturer’s standard.
C. Toilet Accessory Schedule Symbol / Manufacturer / Model No.:
1. G – provide one of the following:
a. Bobrick No. B-270
b. ASI No. 20852
c. Bradley Model 4A10
2.9 SHOWER CURTAIN / ROD
A. Rod: Type 304 stainless steel, satin finish, 18 gauge, 1-1/4” diameter rod.
Flanges are 2-1/2” square.
MAHG121038 10 28 00-4 TOILET AND BATH ACCESSORIES