Specifications - Lord and Son Construction, Inc.

SECTION 21 13 17.00 10
DRY PIPE SPRINKLER SYSTEM, FIRE PROTECTION
05/09
PART 1
GENERAL
1.1 REFERENCES
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WATER WORKS ASSOCIATION (AWWA)
AWWA B300
AWWA B301
AWWA C651
AWWA C652
(2004) Hypochlorites
(2004) Liquid Chlorine
(2005; Errata 2005) Standard for Disinfecting
Water Mains
(2002) Disinfection of Water-Storage
Facilities
ASME INTERNATIONAL (ASME)
ASME B16.1
ASME B16.11
ASME B16.21
ASME B16.9
ASME B18.2.2
(2005) Standard for Gray Iron Threaded
Fittings; Classes 125 and 250
(2009) Forged Fittings, Socket-Welding and
Threaded
(2005) Nonmetallic Flat Gaskets for Pipe
Flanges
(2007) Standard for Factory-Made Wrought
Steel Buttwelding Fittings
(1987; R 2005) Standard for Square and Hex
Nuts
ASTM INTERNATIONAL (ASTM)
ASTM A 135/A 135M
ASTM A 183
ASTM A 449
(2009) Standard Specification for Electric-
Resistance-Welded Steel Pipe
(2003; R 2009) Standard Specification for
Carbon Steel Track Bolts and Nuts
(2007b) Specification for Hex Cap Screws,
Bolts, and Studs, Steel, Heat Treated,
120/105/90 ksi Minimum Tensile Strength,
General Use
Section 21 13 17.00 10 Page 1