Specifications - Lord and Son Construction, Inc.

tile base without wall tile.
2. ANSI A108.10: installation of grout in tilework.
1.4 DELIVERY, STORAGE, AND HANDLING
A. Deliver packaged materials and store in original containers with seals unbroken
and labels intact until time of use, in accordance with manufacturer's instruction.
All cartons must be from same Lot.
1.5 PROJECT CONDITIONS
A. Maintain environmental conditions and protect work during and after installation in
accordance with referenced standards and manufacturer's printed
recommendations. All cartons must be from the same lot.
PART 2 – PRODUCTS
2.1 TILE MATERIALS
A. General:
1. Colors, patterns, and locations of all tile types are as indicated on the
Drawings. Manufacturer’s listed below are to be Contracting Officer’s control
sample. Other manufacturer’s must submit samples prior to bid matching color
and finish in order to be considered “equal”.
B. Porcelain Floor Tile:
1. PORC1: 12 inch x 12 inch: “Diamante – Unpolished” as manufactured by
Dal-Tile.
C. Porcelain Wall Tile:
1. WT1: 12 inch x 12 inch: “Diamante – Polished” as manufactured by Dal-Tile.
D. Porcelain Wall Base:
2.2 SETTING MATERIALS
1. PTB1: 6 inch x 12 inch: “Diamante – Polished Cove Base” as manufactured
by Dal-Tile.
A. Manufacturers:
1. Laticrete International
2. MAPEI Americas
3. Mer-Krete Systems.
MAHG121038 09 30 00-2 TILING