Specifications - Lord and Son Construction, Inc.

SECTION 23 00 00
AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS
11/09
PART 1
GENERAL
1.1 REFERENCES
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)
AMCA 500-D
(1998) Laboratory Methods of Testing Dampers
for Rating
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 62.1 (2007; INT 2007; INT 2-15 2008; Errata 2008;
Addenda a, b, e, f and h 2008; Errata 2009)
Ventilation for Acceptable Indoor Air Quality
ASHRAE 70
ASHRAE 90.1 - IP
(2006) Method of Testing for Rating the
Performance of Air Outlets and Inlets
(2007; Supplement 2008; Errata 2009; Errata
2009; INT 1-3 2009) Energy Standard for
Buildings Except Low-Rise Residential
Buildings, I-P Edition
ASME INTERNATIONAL (ASME)
ASME A13.1
(2007) Scheme for the Identification of
Piping Systems
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
ASTM A 53/A 53M
ASTM A 924/A 924M
ASTM B 117
(2009) Standard Specification for Zinc (Hot-
Dip Galvanized) Coatings on Iron and Steel
Products
(2007) Standard Specification for Pipe,
Steel, Black and Hot-Dipped, Zinc-Coated,
Welded and Seamless
(2009a) Standard Specification for General
Requirements for Steel Sheet, Metallic-Coated
by the Hot-Dip Process
(2009) Standing Practice for Operating Salt
Spray (Fog) Apparatus
Section 23 00 00 Page 1